Cloud Based Monitoring Hardware and Software Products

Data-Command provides cloud-based monitoring hardware and software solution. Our hardware interfaces directly with your equipment in order to transmit your information to the cloud where it can immediately be displayed on our Data-Command Info-Portal™. Your equipment is connected to a Data-Command compliant product which sends it via an internet connection, utilizing standard communication such as cellular, satellite, DSL or cable communication.

Data-Command Lynx – Hardwired Solution

The Data-Command Lynx™ is used to connect equipment via wire and cable. It can monitor up to 12 digital inputs and 16 analog inputs. It can control up to 4 Digital outputs and 8 Analog Outputs. To communicate with our Info-Portal, it can utilize an existing connection to the internet via cable, DSL, or ethernet connection, or via our cellular solution if a hardwired connection is unavailable. All that information in one unit.

  • Power Input
    • 12 to 28 Volts DC or AC, < 400 mA typical
  • Digital Inputs
    • Range 0 to 30 Volts AC/DC
    • Logic Low input 0 to 1 Volt
    • Logic High input 2 to 30 Volts
    • Input Resistance 1.2 K ohm nominal
    • Response time 1 millisecond
    • Counter capability 2000 Hz Max (each input)
    • Isolation Optically Isolated
    • Functions Latching capability – as fast as 1 millisecond
Data-Command Lynx

Data-Command Lynx
  • Relay Outputs
    • Type SPST, Form A – 1 Normally Open Contact (Two relays are Form C and configurable as Normally Open or Normally Closed to the terminals
    • Contact Ratings 1 Amp @ 24 Volts AC/DC
    • Pulse Resolution 1 millisecond pulse increments
  • Analog Inputs
    • Quantity: 4
    • Range: -10 to + 10 volts DC or 4 – 20 mA or RTD
    • A/D resolution: 16 bits (12 bits effective)
    • Full Scale Accuracy: better than 1% full-scale
  • Analog Outputs
    • Quantity: 2
    • Range: 0 – 10 volts DC or 4 – 20 mA
    • D/A resolution: 8 bits
    • Full Scale Accuracy: better than 1% full-scale

 

Learn More >

OPC Connectivity – SCADA and HMI

SCADA Interface
The Data-Command Data-bridge™ software is an OPC Server/Client Application which allows you to link to existing SCADA systems like Rockwell RSview, GE Proficy/iFix , Wonderware, Iconics and many more.

Learn More >

Data-Command Data-Bridge Software
Data-Command Data-Bridge Software

Cellular Connectivity

Utilizing the most recent technology, Data-Command’s packet optimized solution allows us to  offer economical communication via 4G LTE cellular technology. Many have tried to connect a PLC to a cellular modem only to find that at the end of the first month they have incurred substantial costs. Through Data-Command, our customers can enjoy all the convenience of cellular connectivity at an affordable price.

Learn More >



Our Cloud Based Monitoring Hardware and Software Products

  • Can be used with any internet connection (cellular, DSL, cable modem, T1, etc)
  • Supports many 3rd party protocols
  • Firewall friendly; can reside behind corporate security with no external ports open
  • Send information starting at 16 floating point values to Data-Command
  • Send information starting at 32 discrete values to Data-Command
  • Self diagnostics and health status

Learn More >